- Profil d'entreprise
-
- Spotlight
-
-
-
-
SÉRIES D'ESSAIS POUR LA COULÉE DE JANTES EN ALUMINIUMmars 4, 2019/1 commentaire -
Développement de nouveaux produits : Unitubefévrier 25, 2019/
-
-
-
-
water miscible release agent for non-ferrous die casting
Description:
TMDW8 is a newly developed, high-quality water-based mould release agent. It is concentrated and was specially developed for modern non-ferrous die casting. It is suitable for aluminium, zinc and magnesium alloys. The finished parts are easy to demould and have an exceptionally even surface. If used correctly, safe casting without build-up of release agents on the tools is possible. TMDW8 is silicone-free!
TMDW8 is physiologically harmless and meets high standards in terms of occupational safety, environmental protection and legal requirements.
Range of application:
Aluminium, zinc and magnesium die casting.
Technical Data:
Appearance:
Odour:
Viscosity:
pH-Value:
Density (20°C):
Hazard Marks:
VBF:
white emulsion
typical
< 100cP
pH=8,9
0,97 g/cm3
one Hazard marking according to Gef.Stoff.V.
unassigned
Application:
TMDW8 is diluted with water. A dosing pump is recommended for dilution. The dilution ratio depends on the degree of difficulty of the castings. As an initial dilution 1:60 is recommended, after an appropriate start-up time dilutions up to 1:100 are possible. The release agent should be applied evenly. Ensure that all areas of the tools are well moistened by the release agent.
Cleaning:
The castings and machines can be cleaned with commercially available alkaline cleaners.
Storage:
The containers should be stored dry and frost-free. Avoid direct sunlight.
Storage stability: min. 6 months
Packaging:
25kg hobbock, 200kg barrel and 850kg IBC
Status: 01.12.1998
CONTACTEZ-NOUS
Téléphone : (0049) (0) 5241/300 71-0
E-mail: info@foebus.com
Fax: (0049) (0) 5241/300 71-11
Ludwig Föbus GmbH & Co KG
Brockhägerstr. 276
D-33334 Gütersloh
À PROPOS DE NOUS
Ludwig Föbus GmbH & Co KG est un fabricant et une société commerciale spécialisée dans les fournitures de fonderie et de modélisme. Nous servons des clients dans plus de 40 pays à travers le monde avec une grande variété de produits. Nous nous engageons à la satisfaction du client, nous nous définissons comme les prix les plus compétitifs du marché combinés à un service à la clientèle supérieur.
CONTACTEZ-NOUS
- (0049) (0) 5241/300 71-0
- (0049) (0) 5241/300 71-11
- info@foebus.com
- Ludwig Föbus GmbH & Co KG
Brockhägerstr. 276
D-33334 Gütersloh
LIENS UTILES
Copyright © 2019 - Ludwig Föbus GmbH & Co KG
