Polishing points version P1

Version P1:
These mounted points are only supplied in one grit combination. The resulting grinding pattern corresponds approximately to a grit size of 100. Due to the hard rubber bond, these polishing points are particularly suitable for fine grinding of cast materials, hardened and unhardened, alloyed and unalloyed steels. They do not get chocked and are characterised by high economic efficiency at moderate contact pressure. V_max: 50 m/s

Version P2:
The polishing points of this group are supplied as standard in 120 grit, but are also partly available in the 4 grit sizes shown below. The soft rubber bond results in a very soft cut. Polishing points of group P2 are mainly used where pre-finished surfaces are to be given a fine to gloss polish. Available grit sizes: 46 black, 80 light grey, 120 red, 220 brown, 280 green