Ludwig Föbus GmbH & Co KG est un fabricant et une société commerciale spécialisée dans les fournitures de fonderie et de modélisme.
Nous servons des clients en Europe et dans le monde entier avec une grande variété de produits.La satisfaction de nos clients est prioritaire. Celle-ci résulte d´un niveau de prix compétitif au marché et d´un service à la clientèle supérieur.
Home » APPROVISIONNEMENT DE LA FONDERIE » Release Agents » Non-Ferrus Die Casting » FöbuChem TMDW7
Description:
TMDW7 is a newly developed, high-quality water-based mould release agent. It is concentrated and was specially developed for modern non-ferrous die casting. It is suitable for aluminium, zinc and magnesium alloys. The finished parts are easy to demould and have an exceptionally even surface. If used correctly, safe casting without build-up of release agents on the tools is possible.
TMDW7 is physiologically harmless and meets high standards in terms of occupational safety, environmental protection and legal requirements.
Range of application:
Aluminium, zinc and magnesium die casting.
Technical Data:
Appearance:
Odour:
Viscosity:
pH-Value:
Density (20°C):
Hazard Marks:
VBF:
white emulsion
typical
< 100cP
pH=8,8
0,99 g/cm3
none (according to Gef.Stoff.V.)
unassigned
Application:
TMDW7 is diluted with water. A dosing pump is recommended for dilution. The dilution ratio depends on the degree of difficulty of the castings. As an initial dilution 1:80 is recommended, after an appropriate start-up time dilutions up to 1:140 are possible. The release agent should be applied evenly. Ensure that all areas of the tools are well moistened by the release agent.
Cleaning:
The castings and machines can be cleaned with commercially available alkaline cleaners.
Storage:
Packaging:
25kg hobbock, 200kg barrel and 850kg IBC
Status: 16.12.1998
Téléphone : (0049) (0) 5241/300 71-0
E-mail: info@foebus.com
Fax: (0049) (0) 5241/300 71-11
Ludwig Föbus GmbH & Co KG
Brockhägerstr. 276
D-33334 Gütersloh
Ludwig Föbus GmbH & Co KG est un fabricant et une société commerciale spécialisée dans les fournitures de fonderie et de modélisme. Nous servons des clients dans plus de 40 pays à travers le monde avec une grande variété de produits. Nous nous engageons à la satisfaction du client, nous nous définissons comme les prix les plus compétitifs du marché combinés à un service à la clientèle supérieur.
Copyright © 2019 - Ludwig Föbus GmbH & Co KG
Indiquez-nous vos besoins ou votre demande et nous vous répondrons dans les plus brefs délais.
Brockhägerstr. 276
D-33334 Gütersloh