Ludwig Föbus GmbH & Co KG es una empresa fabricante y comercial especializada en suministros de fundición y patronaje.
Servimos a clientes en Europa y en todo el mundo con una gran variedad de productos. Estamos comprometidos con la satisfacción del cliente, definimos como los precios más competitivos del mercado combinados con un servicio al cliente superior.
Home » SUMINISTRO DE LA FUNDACIÓN » Release Agents » Non-Ferrus Die Casting » FöbuChem TMDW17
Description:
TMDW17 is a newly developed, high-quality water-based mould release agent. It is concentrated and was specially developed for modern non-ferrous die casting. It is suitable for aluminium, zinc and magnesium alloys. The finished parts are easy to demould and have an exceptionally even surface. If used correctly, safe casting without build-up of release agents on the tools is possible.
TMDW17 is physiologically harmless and meets high standards in terms of occupational safety, environmental protection and legal requirements.
Range of application:
Aluminium, zinc and magnesium die casting.
Technical Data:
Appearance:
Odour:
Viscosity:
pH-Value:
Density (20°C):
Hazard Marks:
VBF:
white emulsion
typical
< 100cP
pH=8,7
0,99 g/cm3
no Hazard marking according to Gef.Stoff.V.
unassigned
Application:
TMDW17 is diluted with water. A dosing pump is recommended for dilution. The dilution ratio depends on the degree of difficulty of the castings. 1:40 is recommended as the initial dilution, higher dilutions are possible after an appropriate start-up time. The release agent should be applied evenly. Ensure that all areas of the tools are well moistened by the release agent.
Cleaning:
The castings and machines can be cleaned with commercially available alkaline cleaners.
Storage:
Packaging:
25kg Hobbock, 200kg Barrel
Status: 17.08.2001
Teléfono: (0049) (0) 5241/300 71-0
E-mail: info@foebus.com
Fax: (0049) (0) 5241/300 71-11
Ludwig Föbus GmbH & Co KG
Brockhägerstr. 276
D-33334 Gütersloh
Ludwig Föbus GmbH & Co KG es una empresa fabricante y comercial especializada en suministros de fundición y patronaje. Servimos a clientes en más de 40 países alrededor del mundo con una gran variedad de productos. Estamos comprometidos con la satisfacción del cliente, definimos como los precios más competitivos del mercado combinados con un servicio al cliente superior.
Copyright © 2019 - Ludwig Föbus GmbH & Co KG
Indique sus necesidades o su consulta y nos pondremos en contacto con usted lo antes posible.
Brockhägerstr. 276
D-33334 Gütersloh