- Company profile
-
- Spotlight
-
-
-
-
TEST SERIES FOR CASTING OF ALUMINIUM RIMSMarch 4, 2019/0 Comments -
NEW PRODUCT DEVELOPMENT: UNITUBEFebruary 25, 2019/
-
-
-
-
Voriger
Nächster
1) Flat gripper made of hard ferrite, anisotropic, galvanized
- Can be used at temperatures of up to 200 °C
| Maße in mm | Gewicht in g | Haftkraft in N | |
|---|---|---|---|
|
d |
H |
|
|
|
10 |
4,5 |
2 |
4 |
|
13 |
4,5 |
3 |
10 |
|
16 |
4,5 |
4,5 |
18 |
|
20 |
6 |
10 |
30 |
|
25 |
7 |
19 |
40 |
|
32 |
7 |
30 |
80 |
|
36 |
7,7 |
40 |
100 |
|
40 |
8 |
55 |
125 |
|
47 |
9 |
80 |
180 |
|
50 |
10 |
100 |
220 |
|
57 |
10,5 |
140 |
280 |
|
63 |
14 |
230 |
350 |
|
80 |
18 |
485 |
600 |
|
100 |
22 |
900 |
900 |
| Maßbereich d in mm | Toleranz d in mm | Maßbereich H in mm | Toleranz H in mm |
|---|---|---|---|
|
10 – 25 |
± 0,2 |
4,5 – 6 |
+ 0,2 / - 0,1 |
|
32 – 40 |
± 0,3 |
7 – 7,7 |
+ 0,3 / - 0,2 |
|
47 – 50 |
+ 0,5 / - 0,3 |
8 |
+ 0,4 / - 0,2 |
|
57 - 100 |
+ 0,6 / - 0,3 |
9 – 22 |
+ 0,5 / - 0,2 |
The holding forces have been determined on a polished plate of ST37 with a thickness of 10 mm with vertical withdrawal of the magnet. A deviation of up to at -10 % compared to the specified value is possible in exceptional cases. In general, the value is exceeded. Smaller cracks in the magnet material have no influence on the adhesive force.
2) Flat gripper made of SmCo5, anisotropic, galvanized
- Can be used at temperatures of up to 200 °C
| Maße in mm | Gewicht in g | Haftkraft in N | |
|---|---|---|---|
|
d |
H |
|
|
|
6 |
4,5 |
1,0 |
5 |
|
8 |
4,5 |
1,5 |
11 |
|
10 |
4,5 |
2,5 |
20 |
|
13 |
4,5 |
4,5 |
40 |
|
16 |
4,5 |
6,5 |
60 |
|
20 |
6 |
15 |
90 |
|
25 |
7 |
22 |
150 |
|
32 |
7 |
40 |
220 |
The dimensions are in accordance with the DIN 7168-m standard. General tolerances for length and angle dimensions. Deviating from this for dimension H for nominal values up to 6 mm, a tolerance of + 0.2 / - 0.1 mm are taken as a basis.
The holding forces have been determined on a polished plate of ST37 with a thickness of 10 mm with vertical withdrawal of the magnet. A deviation of up to at -10 % compared to the specified value is possible in exceptional cases. In general, the value is exceeded. Smaller cracks in the magnet material have no influence on the adhesive force.
GET IN CONTACT
Phone: (0049) (0) 5241/300 71-0
E-mail: info@foebus.com
Fax: (0049) (0) 5241/300 71-11
Ludwig Föbus GmbH & Co KG
Brockhägerstr. 276
D-33334 Gütersloh
ABOUT US
Ludwig Föbus GmbH & Co KG is a manufacturer and trading company specialised in foundry and patternmaking supplies. We serve customers in more than 40 countries around the world with a tremendous variety of products. We are committed to customer satisfaction, we define as the most competitive market prices combined with superior customers service.
CONTACT US
- (0049) (0) 5241/300 71-0
- (0049) (0) 5241/300 71-11
- info@foebus.com
- Ludwig Föbus GmbH & Co KG
Brockhägerstr. 276
D-33334 Gütersloh
USEFUL LINKS
Copyright © 2019 - Ludwig Föbus GmbH & Co KG
